Harbor View Textured Stripe

Harbor View Textured Stripe

Bring a calm, coastal feel to any room with Harbor View Textured Stripe. This removable wallpaper features a refined, textured stripe print that adds depth without overwhelming your space. Each roll is 24 inches wide and available in lengths up to 120 inches to fit most wall heights. All our wallpapers are PVC-free and printed with eco-friendly, water-based inks.

Key Features

• Removable and renter-friendly design made for easy updates and refreshes
• Subtle, textured stripe look for a timeless, coastal-inspired aesthetic
• 24 in wide panels for straightforward alignment and fewer seams
• Available in lengths up to 120 in to suit standard ceilings and accent walls
• PVC-free substrate printed with eco-friendly, water-based inks

Measure & Plan

Measure your wall width in inches, then divide by 24 to estimate the number of panels needed. Always round up and allow extra for trimming and pattern alignment.

• Install on smooth, clean, dry, and fully cured painted surfaces
• Not recommended for textured walls, unsealed surfaces, or high-moisture areas

Installation Guidance

1. Prepare: Clean the wall, repair any bumps or holes, and ensure paint is fully cured.
2. Layout: Mark a plumb line to keep your first panel perfectly straight.
3. Apply: Align the first 24 in panel to the plumb line and apply according to your material’s method. Smooth from top to bottom with a felt squeegee or soft cloth to remove bubbles.
4. Seams: Butt edges gently without overlap; avoid stretching the material.
5. Trim: Use a sharp utility blade to trim excess at ceilings, baseboards, and around fixtures. Turn off power when working near outlets and switches.

For best results, acclimate the wallpaper to room temperature and work with two people when installing larger drops.

Care Instructions

• Wipe gently with a soft, damp cloth; use mild soap if needed
• Avoid abrasive pads, bleach, or solvent-based cleaners
• Blot spills promptly and test cleaners on a small area first