Heritage Factory Brick Wall

Heritage Factory Brick Wall

Bring the character of timeworn brick into your home with this removable wallpaper. Heritage Factory Brick Wall delivers the look of an authentic industrial backdrop—without dust, grout, or renovation. All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful finish you can feel good about.

Key Features

• Removable and renter-friendly; designed to install and remove cleanly on most properly painted, smooth walls.
• Rolls measure 24 inches wide and are available in heights up to 120 inches to match your wall.
• PVC-free substrate printed with water-based inks.
• Edge-to-edge panel alignment for a seamless brick look.
• Best on smooth, clean, dry, and primed surfaces; not recommended for highly textured or damp areas.

Sizing Guide

Choose the roll height that meets or slightly exceeds your wall height (up to 120 inches), then calculate how many 24-inch-wide panels you need.

1. Measure the full width and height of your wall.
2. Divide wall width (in inches) by 24 to determine panel quantity, then round up.
3. Allow a small margin for trimming at the ceiling, baseboard, and corners.

Installation

For best results, install on fully cured paint (wait at least 30 days after painting). Avoid heavy texture, moisture, or fresh primer that hasn’t cured.

1. Clean the wall with a damp, lint-free cloth and let it dry completely.
2. Mark a plumb, vertical guideline to start your first panel.
3. If using self-adhesive material: peel a few inches of backing, align at the top, and smooth downward with a felt squeegee, removing air as you go. If using paste-applied material: apply a thin, even coat of wallpaper adhesive per the adhesive manufacturer’s instructions and smooth the panel into place.
4. Hang subsequent panels edge-to-edge (do not overlap), matching the design. Smooth bubbles outward.
5. Trim excess along ceilings, baseboards, and around outlets with a sharp blade. Turn off power when working near electrical openings.
6. To remove, lift a corner and peel back slowly at a low angle.

Care Instructions

• Wipe clean with a soft, damp cloth.
• Avoid abrasive pads and harsh chemicals (including bleach or ammonia).
• Use in well-ventilated spaces; avoid direct water exposure.

Why You'll Love It

• Authentic, industrial brick aesthetic without the mess of masonry.
• Eco-conscious materials: PVC-free and printed with water-based inks.
• Flexible, made-to-fit panel sizing for accent walls, bedrooms, studios, and entryways.