Historic Warehouse Exposed Brick

Historic Warehouse Exposed Brick

Bring industrial loft character to your home with this removable wallpaper. Historic Warehouse Exposed Brick adds the warm patina of aged masonry—perfect for accent walls in living rooms, bedrooms, offices, or rentals—without the mess of real brick.

Printed on premium, PVC-free material with eco-friendly, water-based inks, it’s a stylish, renter-friendly upgrade that’s easy to apply and easy to remove.

Key Features

• Removable, renter-friendly wallpaper for effortless home decor refreshes
• Realistic exposed brick design that complements industrial, rustic, and modern interiors
• PVC-free substrate printed with water-based inks for a lower-impact choice
• Clean, straight edges designed for precise, edge-to-edge panel alignment
• Simple panel-by-panel installation with minimal tools
• Works best on smooth, properly painted and primed interior walls

Size & Coverage

Each roll is 24 inches wide and up to 120 inches high (up to 20 sq ft per roll). To estimate quantity, measure your wall width and divide by 24 inches; order enough rolls to cover the full width and allow extra for trimming at the top and bottom.

Installation Guidance

1. Ensure walls are smooth, clean, dry, and fully cured. Wait at least 30 days after painting.
2. Turn off power and remove switch plates and outlet covers.
3. Mark a plumb starting line with a level—do not rely on the corner.
4. Starting at the top, apply the first panel and smooth from the center outward with a felt squeegee or soft cloth to remove air bubbles.
5. Align the next panel edge-to-edge, matching the design. Do not overlap seams.
6. Trim excess at the ceiling, baseboards, and around openings with a sharp blade.

Tip: If your wall width is close to a multiple of 24 inches or includes tricky cuts, consider ordering an extra panel.

Care & Removal

• Wipe gently with a soft, damp cloth; use mild soap if needed.
• Avoid abrasive scrubbers, bleach, and solvent cleaners.
• To remove, lift a corner and peel back slowly at a low angle. If any residue remains, clean with warm, soapy water.

Surface Compatibility

• Best on smooth, sealed, non-porous, painted walls (eggshell or satin finishes recommended).
• Not recommended for textured surfaces, raw drywall, brick, stucco, or areas with heavy, sustained moisture.