Little Viking Voyages

Little Viking Voyages

Set sail for story time. Little Viking Voyages brings playful longships and adventurous energy to nurseries, kids’ rooms, and cozy corners—without the commitment of traditional wallpaper. This removable design installs without paste—simply peel, position, and smooth—and lifts cleanly when it’s time for a new voyage. Every panel is PVC-free and printed with eco-friendly, water-based inks for a safer, low-odor choice in your home.

Key Features

• Removable, renter-friendly wallpaper that installs in minutes and removes cleanly
• PVC-free material printed with eco-friendly, water-based inks
• Matte finish helps reduce glare and looks great in photos
• Panels are 24 inches wide; select heights up to 120 inches for floor-to-ceiling coverage
• Edge-to-edge alignment for a continuous pattern when panels are placed side by side
• Made to order to reduce waste

Size & Coverage

Each roll (panel) is 24 inches wide. Choose a height that matches or slightly exceeds your wall height (up to 120 inches), then trim during install.

• Measure your wall width and divide by 24 inches to estimate how many panels you need, then round up.
• Order all panels for a wall at the same time for the most consistent color match.

Surface Compatibility

• Best on smooth, clean, dry, non-textured, painted walls (eggshell or satin finishes are ideal).
• Not recommended for heavy texture, brick, raw plaster, or walls with moisture issues.
• Freshly painted walls should cure fully (typically 30 days) before installation.

Installation Guidance

1. Unroll panels and allow them to acclimate in the room for a few hours.
2. Clean the wall with a damp, lint-free cloth and let dry completely.
3. Mark a plumb line to keep the first panel perfectly vertical.
4. Peel 6–12 inches of backing from the top, align to your plumb line, and tack in place.
5. Smooth downward with a squeegee or soft cloth, working from the center outward to remove bubbles.
6. Continue peeling the backing while smoothing. Butt edges gently—do not overlap.
7. Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
8. To remove, peel slowly from a corner at a low angle.

Care Instructions

• Wipe with a soft, damp cloth as needed.
• Avoid harsh cleaners, bleach, and abrasive scrubbing.
• Suitable for low to moderate humidity; ensure proper ventilation in bathrooms.

Good to Know

• Minor color variation can occur between print runs; order all panels together when possible.
• For best results, install at room temperature and avoid stretching the material during application.