Misty Jungle Sanctuary Mural

Transform your space with the Misty Jungle Sanctuary Mural, a removable wallpaper that brings lush, tranquil rainforest vibes to any room. Designed for easy, renter-friendly updates, this mural is printed on a PVC-free substrate with eco-friendly, water-based inks. Each roll is 24 inches wide and made to fit wall heights up to 120 inches, creating a seamless, nature-inspired statement wall.

Key Features

• Removable and repositionable during installation for a stress-free setup
• PVC-free material printed with eco-friendly, water-based inks
• Panels measure 24 inches wide for easy alignment and a continuous mural look
• Choose your height up to 120 inches to fit most standard walls
• Ideal for bedrooms, living rooms, nurseries, and home offices

Size and Coverage

• Panel width: 24 inches
• Available panel height: up to 120 inches
• How many panels do you need? Measure your wall width in inches, divide by 24, then round up to the next whole number
• Allow an extra 2–4 inches in height for trimming at ceiling and baseboards

Installation Guidance

1. Prepare the wall: Ensure it is smooth, clean, dry, and fully cured (wait at least 30 days after painting). Remove dust and outlet covers.
2. Mark a level line: Use a level to draw a vertical guideline for your first panel.
3. Apply the first panel: Peel back 6–12 inches of the liner, align at the top, and smooth downward using a squeegee or soft cloth, working from the center out.
4. Match the design: Hang the next 24-inch panel edge-to-edge, carefully aligning the pattern for a seamless look.
5. Trim and finish: Use a sharp blade to trim along ceilings, baseboards, and around outlets. Smooth out any remaining bubbles.

Care Instructions

• Wipe gently with a soft, damp cloth as needed
• Avoid abrasive cleaners, bleach, or heavy scrubbing
• Install on smooth, non-textured walls; avoid high-humidity areas without proper ventilation

Good to Know

• Eco-conscious choice: PVC-free wallpaper printed with water-based inks
• Suitable for interior use on properly primed and painted walls
• To remove, slowly peel at a low angle to help protect the paint beneath