Modernist Geometric Mosaic Wall

Modernist Geometric Mosaic Wall

Bring structure, rhythm, and modern artistry to your space with this removable wallpaper. The Modernist Geometric Mosaic Wall blends clean lines and tessellated shapes to create a statement feature in living rooms, bedrooms, entryways, and home offices—without a permanent commitment.

PVC-free and printed with eco-friendly, water-based inks, this design offers a stylish, responsible choice for home decor.

Key Features

• Removable, renter-friendly wallpaper designed for easy update and clean removal from most properly primed walls.
• Contemporary geometric mosaic pattern that adds depth and balance to modern interiors.
• Panels/rolls are 24 inches wide and available in heights up to 120 inches for floor-to-ceiling coverage.
• Edge-to-edge alignment for a seamless look when installing multiple panels.
• PVC-free substrate with eco-friendly, water-based inks.
• Best on smooth, clean, fully cured painted surfaces.

Size and Coverage

Each roll is 24 inches wide, with selectable heights up to 120 inches.

• To estimate panels: measure your wall width (in inches), divide by 24, and round up.
• Example: a 10 ft wall (120 inches) typically needs 5 panels.
• Choose a panel height equal to your wall height and add 1–2 inches for trimming at the ceiling and baseboard.

Installation Guidance

For best results, install on smooth, dry, non-textured walls painted with a quality primer and fully cured (typically 30+ days for fresh paint). Avoid surfaces like heavy texture, brick, stucco, or stain-resistant/VOC-blocking paints.

1. Prepare: Wipe walls with a damp, lint-free cloth and let dry completely. Mark a plumb vertical guideline using a level where your first panel will start.
2. Plan: Lay out panels on the floor to understand pattern flow and order.
3. Start: Beginning at the top of the first panel, peel back 6–8 inches of the backing.
4. Align: Match the top edge and your plumb line. Lightly tack the exposed adhesive to the wall.
5. Smooth: Using a felt-edge squeegee or soft cloth, smooth from the center outward while slowly removing more backing.
6. Repeat: Hang remaining panels edge-to-edge (butt seams), aligning the pattern as you go. Do not stretch the material.
7. Trim: Use a sharp utility knife and straightedge to trim at ceiling, baseboard, and around outlets/switches.
8. Reposition: If needed, gently lift and realign. Work slowly to avoid creases or tension.

Ideal room temperature during install: moderate, with low humidity. If walls were recently painted, ensure full cure before installation.

Care and Maintenance

• Dust regularly; spot clean with a soft, damp cloth.
• For tougher marks, use mild soap diluted in water and wipe gently.
• Avoid abrasives, bleach, or harsh chemicals.
• Not recommended for high-moisture areas with direct water exposure (e.g., inside showers).
• To remove, slowly peel from a top corner and pull back at a low angle.

Good to Know

• Color may vary slightly between screens and the final print.
• Order all panels for a project at the same time to maintain color continuity.
• Test a small area first if you’re unsure about wall paint or finish compatibility.