Molten Gold and Slate Waves Mural

Molten Gold and Slate Waves Mural

Transform your space with rippling waves in deep slate and warm molten-gold tones. This removable mural wallpaper brings dramatic movement and modern elegance to living rooms, bedrooms, and entryways—without long-term commitment.

Overview

Our murals are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-emission finish. Designed for easy application and clean removal, it’s a renter-friendly upgrade that looks custom-made.

Size & Fit

• Roll width: 24 in
• Roll height: up to 120 in
• Order the number of 24 in-wide rolls needed to span your wall width
• Recommended extra: add 10% to height and width for trimming and leveling

Key Features

• Removable mural wallpaper for home decor—ideal for feature walls
• PVC-free material printed with eco-friendly, water-based inks
• Rich slate and molten-gold wave artwork for a high-impact look
• Smooth, modern finish that photographs beautifully
• Renter-friendly and designed for clean removal from most painted walls

Installation Guidance

1. Prepare the wall: Ensure it is smooth, dry, and clean. Repair holes, sand bumps, and remove dust. Glossy or highly porous surfaces may need a primer.
2. Plan your layout: Measure and mark a plumb line for the first roll. Unroll and check the pattern sequence before hanging.
3. Apply the first roll: Align to the plumb line. Smooth from center outward with a squeegee or soft cloth to remove air pockets. Do not stretch the material.
4. Add subsequent rolls: Match the design edge-to-edge (butt seam) for a seamless look. Continue smoothing as you go.
5. Trim: Use a sharp utility knife and straightedge to trim excess at the ceiling, baseboard, and corners.
6. Settle time: Allow the mural to rest 24 hours before deep cleaning or placing furniture against the wall.

Tip: For wall-width planning, divide your total wall width by 24 inches to estimate the number of rolls. Round up to the next whole roll.

Care Instructions

• Wipe gently with a soft, damp cloth; use mild, non-abrasive soap if needed.
• Avoid harsh cleaners, bleach, or scrubbing pads.
• Keep away from excessive moisture and steam-heavy areas.
• Test any cleaner on a small, inconspicuous area first.

Good to Know

• Color may vary slightly due to monitor settings and wall lighting.
• Install on fully cured paint (generally after 30 days for fresh paint).
• For best results, hang with consistent roll orientation to maintain pattern flow.