Retro Liquid Groove Wallpaper

Retro Liquid Groove Wallpaper

Turn your walls into a flow of motion with Retro Liquid Groove—an undulating, retro-inspired design that brings mid-century energy and modern ease to any room. This removable wallpaper is renter-friendly, PVC-free, and printed with eco-friendly, water-based inks for a beautiful, low-impact refresh. Available in rolls that are 24 inches wide and up to 120 inches high.

Key Features

• Removable and ideal for renters or style refreshes without damage
• PVC-free substrate printed with eco-friendly, water-based inks
• Rolls measure 24 inches wide; choose heights up to 120 inches
• Smooth, modern finish that showcases crisp, flowing lines
• Best on smooth, clean, properly painted walls (not recommended for heavy texture)

Sizing and Coverage

Each roll covers 24 inches in width. To estimate how many panels you need, divide your total wall width (in inches) by 24 and round up. Choose a roll height that matches your wall height; adding 2–4 inches for trimming at the top and bottom is recommended.

Care Instructions

• Wipe gently with a soft, damp cloth
• Use mild soap only if needed; avoid abrasives and harsh chemicals
• Keep edges dry; prolonged moisture or steam may affect adhesion over time

Installation Guidance

1. Unroll and let the wallpaper acclimate in the room for 24 hours.
2. Prep the surface: walls must be smooth, clean, dry, and fully cured (new paint should cure for at least 30 days).
3. Measure, mark a plumb line, and plan your layout from the most visible corner.
4. Apply the first panel along the plumb line, smoothing from the center outward to remove air bubbles.
5. Hang subsequent panels edge-to-edge, aligning the design carefully. Do not stretch the material.
6. Trim excess at the ceiling, baseboard, and around outlets/switches with a sharp utility knife.
7. For best results, avoid heavy cleaning or steam exposure for 48 hours after installation.