Serene Blush Quartz Flow

Serene Blush Quartz Flow

Overview

Invite a gentle, modern calm into your space with Serene Blush Quartz Flow. This removable wallpaper features soft blush tones and fluid, quartz-inspired veining that adds quiet movement and warmth to bedrooms, living rooms, nurseries, and creative corners. Printed on a premium, PVC-free material with eco-friendly, water-based inks, it’s a beautiful, responsible choice for style-forward homes and rentals.

Key Features

• Removable, renter-friendly wallpaper designed for easy DIY installation and clean removal
• Each roll is 24 inches wide with selectable heights up to 120 inches
• PVC-free substrate printed with eco-friendly, water-based inks
• Seam-matching design for a cohesive, flowing look when panels are aligned
• Ideal for smooth, properly painted interior walls

Choosing Your Size

Each roll covers 24 inches in width by your chosen height (up to 120 inches). For best results, add a little extra height for trimming at the ceiling and baseboard.

• Measure your wall height and select the next suitable height option (adding 1–2 inches for trim).
• To estimate how many rolls you need: total wall width (inches) ÷ 24, then round up to the next whole number.
• Order all rolls together to help ensure consistent color across panels.

Installation Guidance

1. Unpack and allow panels to relax flat for a few hours.
2. Prep the wall: clean, dry, smooth, and fully cured paint (typically 30 days after painting). Avoid textured or porous surfaces.
3. Mark a plumb vertical guideline with a level where your first panel will go.
4. Starting at the top, align the first panel and adhere gradually, smoothing as you go to remove air pockets.
5. Install subsequent panels edge-to-edge, carefully aligning the design. Avoid stretching the material.
6. Trim excess at the ceiling, baseboards, and around outlets with a sharp blade.
7. If needed, gently lift and reposition before firmly pressing down the final placement.

Note: Apply only to smooth, non-textured, non-porous interior walls. High humidity, heavy steam, or direct splashes may affect adhesion over time.

Care Instructions

• Wipe clean with a soft, damp cloth; use mild soap if necessary.
• Avoid abrasive pads, bleach, or harsh chemical cleaners.
• Test any cleaner on a small, inconspicuous area first.

Design Notes

The flowing, marble-like pattern softens hard lines and pairs beautifully with light woods, brass accents, and neutral textiles. Use it for a serene feature wall or wrap an entire room to create a soothing, cohesive backdrop.