Serene Unicorn's Gilded Forest

Serene Unicorn's Gilded Forest — Removable Wallpaper

Transform your space with a dreamy forest of gentle greens and golden-toned accents. Serene Unicorn's Gilded Forest is a removable wallpaper designed for renters and homeowners alike—perfect for nurseries, playrooms, bedrooms, and imaginative feature walls. Our wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, responsible finish.

Key Features

• Removable and renter-friendly: repositionable during install for a seamless look.
• Eco-conscious: PVC-free substrate printed with water-based inks.
• Roll size: 24 in wide (about 61 cm); choose roll height up to 120 in (about 305 cm) to match your wall.
• Finish: smooth, matte surface that photographs beautifully.
• Best on smooth walls: primed, painted surfaces (eggshell or satin) yield the cleanest results.

Sizing & Coverage

Measure the full width and height of your wall. Each roll covers 24 inches of width; order enough rolls to span your wall, rounding up. Choose a roll height equal to (or slightly taller than) your wall height—adding 2–4 inches for trimming at the ceiling and baseboard.

Tip: For multiple rolls, allow extra for pattern alignment and trimming around doors, windows, and outlets.

Installation Guide

1. Prep the wall: Ensure it is smooth, clean, dry, and fully cured (fresh paint should cure at least 30 days). Avoid textured, brick, or unpainted surfaces.
2. Plan your layout: Use a level to draw a straight vertical guideline for your first panel.
3. Apply the first panel: Starting at the top, peel back 8–12 inches of the liner and align the panel to your guideline. Smooth downward with a felt squeegee or soft cloth.
4. Continue and align: Butt seams edge-to-edge (do not overlap). Peel, smooth, and adjust as needed—the adhesive is repositionable during install.
5. Trim edges: Use a sharp knife to trim excess at ceiling, baseboards, and around outlets.
6. Set the bond: Apply firm, even pressure over the entire surface. Adhesion strengthens over the first 24 hours.

Care & Removal

• Cleaning: Wipe gently with a soft, damp cloth; a drop of mild soap is fine. Avoid abrasives, bleach, and steam.
• Removal: Peel slowly from a top corner at a low angle. If the room is cool, warming the panel slightly can ease removal.
• Not designed for reuse once fully removed.

Good to Know

• Not recommended for heavily textured walls, unsealed surfaces, or paints formulated to be non-stick/stain-repellent. When in doubt, test a sample first.
• Colors may vary slightly by screen; ordering a sample helps confirm scale and tone in your lighting.