Tapet Slumbering Lake

Tapet Slumbering Lake

Bring a sense of quiet elegance to any room with Tapet Slumbering Lake, a removable wallpaper designed for modern home decor. Inspired by the calm of still waters, this design adds depth and serenity to bedrooms, living rooms, nurseries, and accent walls—without permanent commitment.

Key features

• Removable and renter-friendly—ideal for temporary or long-term styling
• PVC-free material printed with eco-friendly, water-based inks
• Panels measure 24 inches wide and up to 120 inches high for a perfect, floor-to-ceiling fit
• Low-odor printing suitable for home interiors
• Smooth application with clean, seamless edges
• Great for accent walls, full-room wraps, and creative DIY projects

Size and coverage

Each roll/panel is 24 in wide (about 61 cm) and can be ordered at your chosen height up to 120 in (about 305 cm).

How to measure

1. Measure the total width of your wall in inches.
2. Divide by 24 to determine how many panels you need.
3. Round up to the next whole number to ensure full coverage.
4. Select a panel height equal to or slightly taller than your wall; trim excess during installation.

Installation guidance

1. Ensure walls are smooth, clean, and fully dry. Fresh paint should cure for at least 30 days.
2. Wipe the surface to remove dust or grease. Avoid textured or heavily coated surfaces.
3. Mark a plumb line for the first panel to keep everything straight.
4. Starting at the top, peel back a small section of the backing and align the panel to your plumb line.
5. Smooth downward with a squeegee or soft cloth, peeling more backing as you go to remove air bubbles.
6. Butt seams edge to edge for a near-invisible join. Do not overlap.
7. Trim excess at the ceiling, baseboard, and around outlets with a sharp blade.

Care and maintenance

• Wipe gently with a soft, damp cloth as needed.
• Avoid harsh chemicals, abrasives, or excessive scrubbing.
• For best long-term results, keep away from direct splashes and high humidity areas without proper ventilation.
• To remove, peel slowly at a 180° angle. Any minor adhesive residue can be cleaned with mild soap and water.

Good to know

• Designed for indoor use on smooth, properly primed and painted walls.
• PVC-free substrate and water-based inks support healthier indoor air.
• Color may vary slightly from screen to print; ordering extra for pattern continuity is recommended.