Terracotta Loft Brick Wall

Terracotta Loft Brick Wall

Bring the warmth of sun-baked brick into your space with a modern, loft-inspired look. Terracotta Loft Brick Wall is a removable, renter-friendly wallpaper that delivers the texture and tone of real masonry without the mess. Our wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact finish.

Key Features

• Warm terracotta brick design for effortless industrial-chic style
• Removable and renter-friendly—update your space without long-term commitment
• PVC-free substrate printed with eco-friendly, water-based inks
• Great for accent walls, entryways, living rooms, bedrooms, and offices
• True-to-scale pattern repeat for a realistic, layered brick look

Size and Coverage

Each roll is 24 inches wide and available in heights up to 120 inches. Measure your wall width and order the number of rolls needed to span the space.

• Coverage guide: wall width (inches) ÷ 24 = number of rolls (round up)
• Example: a 120-inch wide wall needs 5 rolls

Installation Guidance

1. Prepare the surface: Walls must be smooth, clean, dry, and free of dust or residue. For freshly painted walls, allow paint to fully cure (typically 2–4 weeks).
2. Plan your layout: Measure from the starting edge and mark a plumb vertical line with a level to keep the first roll perfectly straight.
3. Apply: Peel 6–12 inches of backing, align the top of the roll, and smooth downward with a squeegee or soft cloth. Continue peeling and smoothing a little at a time.
4. Match and repeat: Align the brick pattern edge-to-edge with the next roll; smooth out bubbles as you go.
5. Trim: Use a sharp utility knife to trim excess at ceilings, baseboards, and around outlets.
6. Reposition as needed: Gently lift and reapply to correct alignment during installation.

Care Instructions

• Wipe clean with a soft, damp cloth; use mild, non-abrasive soap if needed
• Avoid harsh chemicals, bleach, or abrasive scrubbers
• Ensure adequate ventilation in humid areas and avoid direct water exposure
• Not recommended on highly textured walls or surfaces with heavy coatings that resist adhesion

Note: Color may vary slightly depending on your display and lighting. For best results, test adhesion and color in a small area before full installation.