Urban Slate Geo-Structure Mural

Urban Slate Geo-Structure Mural

Transform your wall with the modern depth of Urban Slate Geo-Structure. This removable wallpaper layers faceted geometry with slate-inspired texture to create a bold, architectural focal point—printed on a premium, PVC-free surface with eco-friendly, water-based inks.

Key Features

• Removable and renter-friendly: Installs cleanly and comes down without residue on most properly painted walls.
• PVC-free material: Safer for your home and the planet.
• Eco-conscious printing: Vivid, low-odor color made with water-based inks.
• Seamless look: Edge-to-edge panel alignment for a continuous mural effect.
• Matte, glare-free finish: Crisp detail with a refined, modern surface.
• Made to order: Freshly printed for consistent color and reduced waste.

Sizing and Coverage

Each roll is a vertical panel measuring 24 inches wide and available in heights up to 120 inches.

• Choose the panel height that meets or slightly exceeds your wall height for clean trimming.
• To find how many panels you need: measure your wall width (in inches), divide by 24, and round up to the next whole number.
• Example: a 110-inch wide wall needs 5 panels (5 x 24 = 120 inches).

Installation Guidance

1. Prepare the wall: Ensure it is smooth, clean, dry, and primed/painted. Allow fresh paint to cure for at least 2–3 weeks.
2. Plan and mark: Measure your starting point and draw a plumb vertical guideline with a level.
3. Apply panel 1: Align to the guideline. If self-adhesive, peel a small section of backing and smooth as you go. If paste-the-wall, apply paste as directed and hang the panel.
4. Smooth: Use a felt squeegee or soft cloth, working from the center outward to remove bubbles—avoid stretching the material.
5. Add panels: Butt-join edges (no overlap) and match the design across each seam.
6. Trim: Carefully trim excess at the ceiling, baseboard, and around outlets with a sharp blade.

Best results on smooth, eggshell-to-semi-gloss painted walls. Not recommended for heavy texture, high moisture, or surfaces with low-/no-VOC paint that hasn’t fully cured.

Care

• Wipe gently with a damp microfiber cloth; use mild soap if needed.
• Avoid abrasives, bleach, and harsh chemicals.
• For removal, slowly pull at a low angle; warm the surface slightly if needed to ease release.

Materials & Sustainability

• PVC-free substrate for a cleaner indoor environment.
• Printed with eco-friendly, water-based inks.
• Low odor and produced on demand to reduce waste.