Urban Weave Vertical Stripe

Urban Weave Vertical Stripe

Elevate your space with a tailored, architectural look. Urban Weave Vertical Stripe blends a soft woven texture with crisp vertical lines to visually heighten ceilings and bring modern balance to living rooms, bedrooms, entryways, and offices. This removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-odor finish you can feel good about.

Key Features

• Removable, renter-friendly design for easy updates and clean removal from most painted walls
• PVC-free substrate; printed with eco-friendly, water-based inks
• Matte, low-glare finish that feels refined and modern
• Panels are 24 inches wide and offered in heights up to 120 inches
• Seam-to-seam pattern alignment for a continuous vertical stripe
• Durable, tear-resistant surface; great for accent walls or full rooms

Sizing & Coverage

Measure your wall height and choose the panel height equal to (or slightly greater than) your wall. Each panel is 24 inches wide. To estimate quantity, divide your wall width by 24 inches and round up; consider one extra panel to account for doors, windows, and trimming.

Best results on smooth, clean, fully cured (painted 30+ days) walls. Not recommended for heavy texture, fresh paint, or surfaces with low-VOC or stain-blocking paints without proper priming.

Installation Guidance

1. Prepare: Clean the wall with a damp, lint-free cloth and let dry. Remove outlet covers and switch plates.
2. Plan: Mark a vertical plumb line where the first panel will hang.
3. Apply: Starting at the top, peel back 8–10 inches of the liner, align to the plumb line, and smooth outward with a felt squeegee or soft cloth.
4. Continue: Peel the liner gradually while smoothing to prevent bubbles. If bubbles appear, lift gently and re-apply.
5. Align: Butt seams carefully so stripes align; do not stretch the material.
6. Trim: Use a sharp blade and straightedge to trim at ceilings, baseboards, and around openings.
7. Set: Smooth all seams and edges. Allow 24 hours to acclimate.

Removal: Gently lift a corner and peel back slowly at a low angle. Any residue can be wiped with a damp cloth if needed.

Care & Maintenance

• Wipe clean with a soft, damp microfiber cloth; mild soap if needed
• Avoid abrasives, bleach, and vigorous scrubbing
• For bathrooms or kitchens, ensure good ventilation and avoid direct, prolonged water contact
• Test any cleaner on a small area first

Good to Know

• Low-odor, PVC-free material with water-based inks for a safer indoor air choice
• Color may vary slightly between batches and screens; order panels together for best match
• Let freshly painted walls cure fully (30+ days) before installation