Violet Sea's Enchanted Grotto

Violet Sea's Enchanted Grotto

Transform your space with Violet Sea's Enchanted Grotto, a removable wallpaper that brings the tranquil magic of an underwater grotto to your walls. Lustrous violets, deep indigos, and soft seafoam tones flow through delicate botanical and coral-inspired forms, adding depth and serenity to bedrooms, nurseries, entryways, and accent walls. PVC-free and printed with eco-friendly, water-based inks, this design is a beautiful, conscious choice for modern home decor.

Key Features

• Removable and renter-friendly: Designed for easy application and clean removal from most properly painted walls.
• Eco-conscious: PVC-free substrate printed with water-based, low-odor inks.
• Custom-fit panels: 24 in wide and up to 120 in high to suit floor-to-ceiling installs.
• Smooth, matte finish: Minimizes glare and enhances fine detail.
• Repositionable during install: Align and adjust for a seamless look.
• Versatile use: Ideal for smooth walls, accent areas, and furniture facades.

Sizing and Coverage

Measure your wall width and height to determine panel count and height.

• Panel width: 24 inches (61 cm)
• Panel height: Choose up to 120 inches (305 cm)
• How many panels? Wall width ÷ 24 in, then round up to the next whole panel.
• Tip: Add 2–4 inches to your height measurement for clean trimming at the ceiling and baseboard.

Installation Guidance

1. Let freshly painted walls cure for at least 30 days.
2. Start with a smooth, clean, dry surface. Avoid heavy textures and walls coated with stain-resistant or Teflon/silicone additives.
3. Mark a plumb vertical line to guide your first panel.
4. Peel back 6–12 inches of the liner, align the top, and apply. Smooth downward with a felt squeegee or soft cloth, peeling more liner as you go.
5. Install subsequent panels edge-to-edge (no overlap), matching the pattern.
6. Lift and reposition as needed. For bubbles, lift gently or use light heat (hair dryer on low) and smooth out.
7. Trim excess at edges and around outlets with a sharp blade.
8. Removal: Slowly peel from a top corner at a low angle. If needed, warm the surface lightly to ease release.

Care Instructions

• Wipe clean with a soft, damp cloth; use mild soap if needed.
• Avoid harsh chemicals, bleach, and abrasive pads.
• Best in dry or well-ventilated spaces; avoid direct water spray.
• Test any cleaner on a small, inconspicuous area first.

Good to Know

• For best results, install on smooth, sealed, eggshell or satin painted walls.
• Not recommended on heavily textured surfaces or unpainted drywall.
• Colors may vary slightly between screens and final print.