Warm Earthen Plaster

Warm Earthen Plaster

Bring the soft, sun-washed character of hand-troweled plaster to your space—without the mess. Warm Earthen Plaster is a removable wallpaper designed for easy, renter-friendly style in living rooms, bedrooms, offices, and entryways. Each roll is 24 inches wide and available in custom heights up to 120 inches, so you can achieve a seamless, tailored look.

All our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-odor finish you can feel good about.

Key Features

• Warm, earthy tones with a subtle plaster-inspired print that adds depth and calm.
• Removable and renter-friendly for easy updates and clean removal on most properly painted walls.
• PVC-free substrate printed with eco-friendly, water-based inks.
• Matte finish to minimize glare and enhance the natural, plaster look.
• Each roll measures 24 in wide; choose heights up to 120 in to fit your wall.
• Ideal for smooth, sealed, and fully cured painted surfaces.

Sizing & Coverage

Each roll covers 24 inches in width by your selected height (up to 120 inches). To estimate how many rolls you need:

1. Measure your total wall width.
2. Divide by 24 inches (2 feet) and round up to the next whole number.
3. Select the roll height that best matches your wall height; add a little extra for trimming at the top and bottom.

Installation Guidance

1. Prep the wall: Ensure the surface is smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days). Remove dust and gloss, and repair any holes or texture.
2. Plan your layout: Draw a light plumb line to keep panels straight. Install left to right, top to bottom.
3. Apply: Peel a small section of the backing from the top of the first panel. Align at the ceiling line, then smooth downward as you gradually remove the backing. Use a felt squeegee or soft cloth to press out air and ensure even adhesion.
4. Seams: Butt panels edge-to-edge without overlapping. Check alignment of the design as you go.
5. Trim: Use a sharp blade to trim excess along ceilings, baseboards, and outlets. Change blades frequently for clean cuts.
6. Tips: Avoid installing on textured walls, in areas with heavy steam or direct water contact, or over primers/paints not compatible with adhesives. For best results, install in a dust-free room at moderate temperature.

Care & Removal

• Dust regularly with a dry cloth or microfiber duster.
• Spot clean with a lightly damp, soft cloth and mild soap if needed; avoid harsh chemicals, bleach, or abrasive scrubbers.
• For removal, slowly peel from a top corner at a low angle. Any minor residue can be wiped away with warm, soapy water.

Good to Know

• Ensure paint is fully cured (about 30 days) before installation for best adhesion and clean removal.
• Color can vary slightly between print runs; order all rolls together for a consistent match.
• We recommend ordering a sample to preview color and finish in your lighting.