Whimsical Kingdom of Dreams Wallpaper

Whimsical Kingdom of Dreams Wallpaper

Turn any room into a storybook escape with our Whimsical Kingdom of Dreams Wallpaper. This removable, renter-friendly design brings soft, imaginative charm to nurseries, bedrooms, playrooms, and creative spaces—without the commitment.

Key Features

• Removable and repositionable: Easy to apply, adjust, and remove with minimal residue.
• Eco-conscious: Always PVC-free and printed with eco-friendly, water-based inks.
• Sized for simple planning: Rolls are 24 inches wide with heights available up to 120 inches.
• Rental-friendly: Refresh your space without permanent changes.
• Vivid, long-lasting color: Designed to keep your walls looking magical for years.

Sizing & Coverage

Each roll is 24 inches wide. Choose the roll height closest to your wall height, up to 120 inches.

1. Measure your wall width and height.
2. Select a roll height equal to or slightly taller than your wall height.
3. Calculate quantity: total wall width (in inches) ÷ 24, then round up to the next whole roll.

Example: A 10-foot (120-inch) wide wall needs 120 ÷ 24 = 5 rolls.

Installation Guidance (Peel-and-Stick)

1. Prepare the surface: Walls must be smooth, clean, dry, and fully cured (wait at least 30 days after painting).
2. Plan your layout: Start at a straight, plumb line. Unroll and match the design from left to right.
3. Apply: Peel back 6–12 inches of backing, align the top, and smooth downward with a felt squeegee or soft cloth.
4. Finish the panel: Continue peeling the backing while smoothing out air bubbles from the center outward.
5. Seams: Butt seams edge-to-edge; do not overlap.
6. Trim: Use a sharp blade to trim excess at ceilings, baseboards, and around outlets.
7. Reposition as needed: Gently lift and realign if necessary.

Surface Prep & Compatibility

• Best on smooth, painted, and properly primed walls.
• Not recommended on textured walls, brick, unpainted drywall, or surfaces with Teflon/silicone paints.
• New paint must cure fully (at least 30 days) before installation.
• Wipe walls with a damp, lint-free cloth and let dry completely prior to application.

Care Instructions

• Wipe clean with a soft, damp cloth; mild soap if needed.
• Avoid harsh cleaners, bleach, and abrasives.
• Keep away from excessive moisture and direct steam.
• For longevity, use gentle, infrequent cleaning and avoid sharp impacts.

Our Sustainable Promise

We’re committed to safer homes and a healthier planet. Every roll is PVC-free and printed with eco-friendly, water-based inks for low-odor, family-friendly decorating.