Whispering Woods Autumn Glow

Whispering Woods Autumn Glow

Invite the warmth of fall into your home with Whispering Woods Autumn Glow. This removable wallpaper layers golden, amber, and russet tones in a softly lit forest motif—perfect for cozy living rooms, welcoming entryways, or serene bedrooms. Printed on a premium, PVC-free material with eco-friendly, water-based inks, it’s a beautiful choice that’s better for your home and the planet.

Key Features

• Removable and renter-friendly: Peel off cleanly without damaging paint.
• Repositionable during install: Adjust panels as you go for a perfect match.
• Matte finish: Reduces glare and enhances the artwork’s natural depth.
• Roll size: 24 inches wide; choose heights up to 120 inches to fit your wall.
• Seam-matching design: Applies panel by panel for a continuous, custom look.
• PVC-free substrate: Printed with eco-friendly, water-based inks.

Best Surface Conditions

• Clean, smooth, dry, and non-textured painted walls
• Fully cured paint (wait at least 30 days after painting)
• Not recommended for textured walls, high-moisture areas, or surfaces with stain-resistant/low-VOC additives that may reduce adhesion

Care Instructions

• Dust gently with a dry microfiber cloth.
• Spot clean with a damp cloth and mild soap; avoid excessive water.
• Do not use abrasives, bleach, or harsh cleaners.

How to Measure

• Measure wall height and select the panel height that meets or slightly exceeds it (up to 120 inches).
• Determine quantity by dividing wall width (in inches) by 24, then round up to the next whole panel.

Installation Guidance

1. Prep: Smooth and repair the wall, remove dust, and let it dry completely. Mark a vertical plumb line where your first panel will go.
2. Start: Peel back 10–12 inches of the backing from the top of the first panel.
3. Align: Position to the plumb line and lightly tack the top in place.
4. Smooth: Using a squeegee or soft cloth, smooth downward and outward while removing the backing a little at a time to avoid bubbles.
5. Continue: Apply the next panel edge-to-edge (do not overlap), aligning the pattern.
6. Trim: Use a sharp utility knife to trim excess along ceilings, baseboards, and around outlets.
7. Adjust: If needed, gently peel back and reposition. Avoid stretching the material.
8. Removal: Lift a corner and peel slowly at a low angle for a clean release.

Sustainably made on PVC-free material and printed with eco-friendly, water-based inks for a safer home and a lighter footprint.